rapid sense system dual temp meter

Description

For all liquid cooling vehicles.

The compact design and the presence of inner batteries allow to use these tools to measure engine parameters on different vehicles. Anyway, if preferred, connecting the charger supplied in the kit directly to a vehicle, it is possible to use the meter only on it.

The meter allows to monitor the cooling temperature by installing two sensors in two different positions of the cooling circuit. These sensors can monitor both the incoming and outgoing cooling temperature to easily value if the cooling system works properly. It is also possible to fit one sensor to monitor the cooling temperature and one to monitor the ambient temperature.

Display range:    -25 ° c ~ 250 ° c (-13 ° f ~ 482 ° f)

Backlight:    blue color

Display unit:    0.1 ° C (° f)

Temperature warning

Display flashes when the temperature is higher or equal to the prescribed value.

Battery type:    cr2032

Battery life time:    230 hours

Effective temperature range:    -10 ° c ~ 60 ° c

Meter size:    69 x 32 x 16

Meter weight:    48 g

Liquid temperature sensor with conical M10x1 thread.

The device is resistant to a few drops of water, but it is not waterproof (therefore it is not recommended to place it under direct jets of water).

Faq

• Is the coolant temperature sensor plug&play or do modifications need to be made to mount it in the cylinder head?

  The original head does not provide for the mounting of an additional sensor and therefore another hole must be drilled, as indicated in the mounting instructions.

• Is the instrumentation backlit?

  If the device is attached to the motor battery, it is backlit. If, on the other hand, it is battery-powered, it does not illuminate.