force master 2.1 electronic controller

商品說明

With an all-new look, the Force Master 2.1 control unit is much easier to configure. Making products more ergonomic and easy to use has always been a Malossi goal: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of a capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management: without functional limitations, it allows the engine to be pushed beyond the barrier of the original rev limiter.

Technical details

Technical details
• Carburation adjusting
• ± 14% LOW / HIGH / MID
• RPM limiter : +1.200 RPM
• Temperature range = -30°C +80°C
• Minimum operating voltage = +7V
• Maximum operating voltage = +16V
• Average current consumption <-200mA
• Environmental protection = IP65
• 4 different maps :
• curva 0 : original exhaust system, original cylinder, original head, original camshaft, original filter
• curva 1 : original exhaust system, Malossi cylinder, original head, original camshaft, original filter
• curva 2 : Malossi with DB killer exhaust system, Malossi cylinder, original head, original camshaft, original filter
• curva 3 : Malossi with DB killer exhaust system, Malossi cylinder, original head, Malossi camshaft, original filter

Full carburetion control is achieved by combining the O₂ controller with the Force Master control unit. The synergy of these two devices has no limits, the entire quoted plane is managed, controlled and optimised for any processing step proposed by Malossi.

本產品僅供競賽或提升車輛性能用途使用，在您車輛按裝產品前，請諮詢您所在地區的相關法規，以確保符合所有當地適用法規。對於任何不當使用，我們不承擔任何責任。