beta ark 50 2t

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7849

To be assembled EXCLUSIVELY with Malossi CRANKSHAFT 53 8009

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 8538

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7036

to change CYL. KIT 31 8403 from piston-pin Ø 10 TO 12 (PLEASE CHECK the exact SELECTION of the installed  piston)

to change CYL. KIT 31 8403 from piston-pin Ø 10 TO 12 (PLEASE CHECK the exact SELECTION of the installed  piston)

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

ONLY for PISTON WITH PIN Ø 12

Spare part for GEAR 67 8998 : out of production

for CYLINDERS Ø 47,6

for ORIGINAL VALVE

Spare part for Malossi EXHAUSTS SYSTEM 3211206 - 3212799 : out of production

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360°

for ORIGINAL VARIATOR

** Homologation Code : NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

ONLY for OVER RANGE MHR ALUMINUM

ONLY for OVER RANGE

for vehicles WITH ORIGINAL CLUTCH BELL Ø 107

for vehicles WITH ORIGINAL CLUTCH BELL Ø 105

for vehicles WITH ORIGINAL CLUTCH BELL Ø 112

ONLY for OVER RANGE

ONLY for OVER RANGE MHR ALUMINUM

for Multivar and original variator - rigidity increase compared to original spring: +40%

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 34

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 33

Spare part for Malossi MULTIVAR 2000 MHR ALUMINUM 5115823 : out of production

for Multivar and original variator - rigidity increase compared to original spring: +30%

ONLY for OVER RANGE

for Multivar and original variator - rigidity increase compared to original spring: +35%

Spare part for Malossi IGNITION 5511182 : out of production

Spare part for IGNITIONS 5514690 - 5515002 : out of production

ELECTRIC SYSTEM IS CUT OUT

Front - for vehicles PRODUCED 1995 --> ** HOMOLOGATED **

Rear - for vehicles PRODUCED 1996 -->

Front - for vehicles PRODUCED 1996 -->

Front - for vehicles PRODUCED 1996 --> ** HOMOLOGATED **

Front - for vehicles PRODUCED 1996 -->

STRENGTHENED for ROAD and RACING USE

STRENGTHENED for ROAD and RACING USE - Carbonitrided inner ring

STRENGTHENED for ROAD and RACING USE

(spare part for Malossi secondary gears 67 8998 : out of production)

Spare part for Malossi EXHAUSTS SYSTEM 3211206 - 3212799 : out of production

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360°

for ORIGINAL VALVE