• Home
  • MBK BOOSTER 50 2T

mbk booster spirit 50 2t euro 0-1

CYLINDER KIT

Wishlist

air aluminium cylinder head ø 47
CYLINDER HEADS

Code 3819708

for Malossi CYLINDERS

-10%
Wishlist

aluminium cylinder kit ø 47 pin ø 10 mhr
CYLINDER KITS - CYLINDERS

Code 31 7559

If the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7849 * (ATTENTION : *2 rings)

Wishlist

cast-iron cylinder kit ø 40 pin ø 10
CYLINDER KITS - CYLINDERS

Code 31 6901

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 8538

Wishlist

cast-iron cylinder kit ø 47 pin ø 10
CYLINDER KITS - CYLINDERS

Code 31 7237

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7036

Wishlist

cast-iron cylinder ø 47 pin ø 10
CYLINDER KITS - CYLINDERS

Code 31 6882

CYLINDER ADAPTABLE ALSO to the ORIGINAL HEAD - IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7036

Wishlist

piston 2t ø 40 with pin ø 12 and 1 rectangular ring size a
PISTONS

Code 34 8544.a0

to change CYL. KIT 31 8565 from piston-pin Ø 10 TO 12 (PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 1 rectangular ring size b
PISTONS

Code 34 8544.b0

to change CYL. KIT 31 8565 from piston-pin Ø 10 TO 12 (PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size 0
PISTONS

Code 34 8538

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size a
PISTONS

Code 34 8538.a0

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size b
PISTONS

Code 34 8538.b0

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size c
PISTONS

Code 34 8538.c0

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size d
PISTONS

Code 34 8538.d0

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size e
PISTONS

Code 34 8538.e0

to change CYL. KIT 31 6901 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed  piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0
PISTONS

Code 34 7036

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0
PISTONS

Code 34 7849

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size a
PISTONS

Code 34 7849.a0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b
PISTONS

Code 34 7036.b0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b
PISTONS

Code 34 7849.b0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c
PISTONS

Code 34 7036.c0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c
PISTONS

Code 34 7849.c0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d
PISTONS

Code 34 7036.d0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d
PISTONS

Code 34 7849.d0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

Wishlist

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size e
PISTONS

Code 34 7036.e0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

CRANKSHAFT - POWER CAMME

-10%
Wishlist

rhq crankshaft with pin ø 10 and stroke 39.2 mm for scooter
CRANKSHAFTS - CONNECTING RODS

Code 53 7621

-10%
Wishlist

rhq crankshaft with wheelbase 80 mm pin ø 12 and stroke 39.2 mm
CRANKSHAFTS - CONNECTING RODS

Code 53 8008

ONLY for PISTON WITH PIN Ø 12

GEARS

Wishlist

pinwheel shaft 146.7 mm (coupl. ø 22.1)
GEARS

Code 6714748

Wishlist

primary gears htq z 16 / 40
GEARS

Code 67 3677

Wishlist

rear wheel shaft with spring drives for minarelli engines
GEARS

Code 67 8995b

Spare part for GEAR 67 8998 : out of production

Wishlist

secondary driveshaft for spring drive z 12
GEARS

Code 67 8994b

Spare part for GEAR 67 8998 : out of production

Wishlist

secondary gear gear wheel z 44
GEARS

Code 67 8996b

Spare part for GEAR 67 8998 : out of production

EXHAUST

Wishlist

flip homologated exhaust system
EXHAUST SYSTEMS - SILENCERS

Code 3216693

TYPE : SA06 - THE "TYPE" ONLY SPECIFIES THE MODEL IN WHICH HOMOLOGATION WAS VALIDATED , THIS DOES NOT LIMIT THE INSTALLATION

-10%
Wishlist

scooter racing mhr exhaust system
EXHAUST SYSTEMS - SILENCERS

Code 3219487

for CYLINDERS Ø 47 - 47,6

Wishlist

wild lion homologated exhaust system
EXHAUST SYSTEMS - SILENCERS

Code 3216586

TYPE : SA06 - THE "TYPE" ONLY SPECIFIES THE MODEL IN WHICH HOMOLOGATION WAS VALIDATED , THIS DOES NOT LIMIT THE INSTALLATION

CARBURETOR KIT

Wishlist

3 vl10 and original valve carbon fibre petals with thickness 0,30/0,35/0,40
REED VALVES - PETALS

Code 27 3549.c0

for ORIGINAL VALVE

Wishlist

automatic fuel compensator macsi
REED VALVES - PETALS

Code 27 8785

Wishlist

black pvc fuel tube with internal ø 5 and external ø 9 mm - length 1 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 22 1231

Wishlist

black pvc fuel tube with internal ø 7 and external ø 12 mm - length 1 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 22 1232

Wishlist

carburettor kit phbg 19 bs
CARBURETTOR (KITS)

Code 1611024

Wishlist

carburettor kit phbg 19 bs mhr
CARBURETTOR (KITS)

Code 1611021

Wishlist

carburettor kit phbg 21 bs
CARBURETTOR (KITS)

Code 1610985

-10%
Wishlist

carburettor kit phbl 25 bs
CARBURETTOR (KITS)

Code 1611011

Wishlist

carburettor phbn 17.5
CARBURETTORS

Code 72 8121

Wishlist

pvc fuel tube ø 5x9 mm - length 1 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216041b

Wishlist

pvc fuel tube ø 5x9 mm - length 10 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216718b

Wishlist

pvc fuel tube ø 6x9 mm - length 1 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216042b

Wishlist

pvc fuel tube ø 6x9 mm - length 10 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216730b

Wishlist

pvc fuel tube ø 7x10 mm - length 1 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216043b

-4%
Wishlist

pvc fuel tube ø 7x10 mm - length 10 m
GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216784b

Wishlist

valve vl10 with carbon petals thickness 0.30
REED VALVES - PETALS

Code 27 7441.c0

TRANSMISSION SET

Wishlist

3 black racing clutch springs ø 2,2 for delta and fly clutch
SPRINGS

Code 29 8745b

Wishlist

3 red reinforced clutch springs ø 2 for delta and fly clutch
SPRINGS

Code 29 8743b

Wishlist

3 yellow racing clutch springs ø 1,8 for delta and fly clutch
SPRINGS

Code 29 8742b

Wishlist

6 htroll rollers ø 15x12 gr.06,8
VARIATOR ROLLERS

Code 66 9417.i0

for ORIGINAL VARIATOR

Wishlist

adjustable automatic delta clutch for clutch bell ø 105
CLUTCHES

Code 52 7643

Wishlist

adjustable automatic delta clutch for clutch bell ø 107
CLUTCHES

Code 52 9451

Wishlist

clutch bell inner ø 107 mm weight 463 grams yamaha-minarelli
CLUTCH BELLS

Code 7719114b

Wishlist

delta system clutch and bell ø 107 for yamaha - minarelli engines
CLUTCHES

Code 5219915

Wishlist

fly system clutch and bell ø 107 for yamaha - minarelli engine
CLUTCHES

Code 5219142

Wishlist

homologated multivar variator for scooter
VARIATORS

Code 51 7075

Homologation Code : e13*92/61*0024*.. - THE "Code" ONLY SPECIFIES THE MODEL IN WHICH HOMOLOGATION WAS VALIDATED , THIS DOES NOT LIMIT THE INSTALLATION

Wishlist

mhr delta system clutch and bell ø 107 for yamaha - minarelli engine
CLUTCHES

Code 5214739

Wishlist

mhr spring set for fly clutch and delta clutches
SPRINGS

Code 29 8747

Wishlist

multivar 2000 mhr aluminum yamaha / minarelli
VARIATORS

Code 5118678

ONLY for OVER RANGE MHR ALUMINUM

Wishlist

multivar mhr variator for yamaha - minarelli
VARIATORS

Code 5113161

Wishlist

multivar mhr variator for yamaha - minarelli for over range transmission unit
VARIATORS

Code 5112800

ONLY for OVER RANGE

Wishlist

non-adjustable automatic fly clutch for clutch bell ø 105
CLUTCHES

Code 52 8796

Wishlist

non-adjustable automatic fly clutch for clutch bell ø 107
CLUTCHES

Code 52 9450

-10%
Wishlist

over range for yamaha - minarelli engines
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 6112811

-10%
Wishlist

over range mhr aluminum complete transmission group for yamaha - minarelli engines
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 6118884

Wishlist

racing spring set for clutch
SPRINGS

Code 29 9605

for vehicles WITH ORIGINAL CLUTCH BELL Ø 107

Wishlist

racing spring set for original clutch
SPRINGS

Code 29 7714

for ORIGINAL CLUTCH BELL Ø 105

-10%
Wishlist

rear pulley system kit ø 128
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 9733

ONLY for OVER RANGE

-10%
Wishlist

rear pulley system mhr aluminum
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 6114590

ONLY for OVER RANGE MHR ALUMINUM

Wishlist

red variator adjuster spring (external ø 53.70x110 mm - ø wire 3.9 mm - k 4.7)
SPRINGS

Code 29 7046.r0

for Multivar and original variator - rigidity increase compared to original spring: +40%

Wishlist

sport spring set for fly clutch and delta clutches
SPRINGS

Code 29 8746

Wishlist

torque driver
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 9223

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 34

Wishlist

torque driver external ø 115 mm
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 8312

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 33

Wishlist

torsion controller variator spring guide for yamaha - minarelli engines 50 to 100 cc
FIXED COVERS - COVERS - TORSION CONTROLLER

Code 2512827

Wishlist

ventilvar half-pulley ø 97
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 7152

Wishlist

ventilvar half-pulley ø 97 mm
TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 6115833

Spare part for Malossi MULTIVAR 2000 MHR ALUMINUM 5115823 : out of production

Wishlist

white variator adjuster spring (external ø 53.10x110 mm - ø wire 3.6 mm - k 3.5)
SPRINGS

Code 29 7047.w0

for Multivar and original variator - rigidity increase compared to original spring: +30%

Wishlist

wing clutch bell internal with ø 107 mm and weight 579 grams for yamaha - minarelli engines
CLUTCH BELLS

Code 7719117

ATTENTION: in order to use Malossi CLUTCH BELL it is necessary to remove surplus material from the internal of the crankcase

Wishlist

wing clutch bell mhr internal ø 107 mm and weight 479 grams for yamaha - minarelli engines
CLUTCH BELLS

Code 7714313

ATTENTION: in order to use Malossi CLUTCH BELL it is necessary to remove surplus material from the internal of the crankcase

Wishlist

x k belt for over range (18x10,2x782 mm 28°)
TOOTHED BELTS

Code 6115822

ONLY for OVER RANGE

Wishlist

x k belt for scooter (16,6x8x745 mm 28°)
TOOTHED BELTS

Code 6117010

Wishlist

x special belt for scooter (16x8x751 mm 28°)
TOOTHED BELTS

Code 6118140

Wishlist

yellow variator adjuster spring (external ø 53.50x115 mm - ø wire 3.7 mm - k 3.8)
SPRINGS

Code 29 7045.y0

for Multivar and original variator - rigidity increase compared to original spring: +35%

IGNITIONS - CONTROLLERS

-30%
Wishlist

eprom board for controller
IGNITIONS - CONTROLLERS

Code 5511193b

Spare part for Malossi IGNITION 5511182 : out of production

Wishlist

extractor for rotor
EXTRACTORS FOR IGNITIONS - CONTROLLERS

Code 6011651

Wishlist

mhr team digitronic digital electronic controller with trimmer
IGNITIONS - CONTROLLERS

Code 5514398

Spare part for IGNITIONS 5514690 - 5515002 : out of production

-10%
Wishlist

mhr team ii inner rotor ignition for yamaha - minarelli scooters
IGNITIONS - CONTROLLERS

Code 5519630

ELECTRIC SYSTEM IS CUT OUT

Wishlist

spark plug cable kit and resistor spark plug cap
IGNITIONS - CONTROLLERS

Code 5519221

Wishlist

spark plug cable with ø 7 mm and length 50 cm
IGNITIONS - CONTROLLERS

Code 2219144b

Wishlist

tc unit electronic controller
IGNITIONS - CONTROLLERS

Code 55 8133

ONLY FOR vehicles WITHOUT IMMOBILIZER KEY

FILTERS

Wishlist

fuel filter ø 6
FUEL FILTERS - OIL FILTERS

Code 03 1380b

Wishlist

fuel filter ø 8
FUEL FILTERS - OIL FILTERS

Code 03 1381b

Wishlist

red filter e13 ø 60 inclined 25° for phbg 15÷21-phbl 20÷26 threaded carburettors
AIR FILTERS

Code 0411505

Wishlist

red filter e5 ø 38 for phbl 20÷25 carburettors with black cap
AIR FILTERS

Code 04 3296.c0

Wishlist

red sponge for original filter
FILTER SPONGES

Code 1411414

for vehicles PRODUCED in 1996 - 1998

BRAKE

Wishlist

brake pads homologated
BRAKES

Code 6215008bb

Front - for vehicles PRODUCED 1996 --> ** HOMOLOGATED **

Wishlist

brake power brake shoes
BRAKES

Code 6215834

Rear - for vehicles PRODUCED 1996 -->

Wishlist

mhr brake pads
BRAKES

Code 6215008br

Front - for vehicles PRODUCED 1996 -->

Wishlist

mhr synt brake pads homologated
BRAKES

Code 6215008bs

Front - for vehicles PRODUCED 1996 --> ** HOMOLOGATED **

SHOCK-ABSORBER

Wishlist

rs1 rear shock absorber - wheelbase 280 mm and maximum ø spring 58 mm
SHOCK ABSORBERS - FORKS

Code 4615434

-10%
Wishlist

rs24 rear shock absorber - wheelbase 267 mm
SHOCK ABSORBERS - FORKS

Code 46 7588

20 mm longer wheelbase

FRAME PARTS

ENGINE CRANKCASE

Wishlist

roller crankcase for yamaha - minarelli engines
COVERS CRANKCASE

Code 2515482

ENGINE ACCESSORIES

Wishlist

2 roller bearings with balls ø 20x47x14 (c3h clearance) for crankshaft for derbi moto and minarelli - yamaha scooter 50 cc
BEARINGS

Code 6611566e

STRENGTHENED for ROAD and RACING USE

Wishlist

2 roller bearings with balls ø 20x47x14 (c4 clearance) for crankshaft for derbi moto and minarelli - yamaha scooter 50 cc
BEARINGS

Code 6616065e

STRENGTHENED for ROAD and RACING USE - Carbonitrided inner ring

Wishlist

2 roller bearings with balls ø 20x47x14 (c4h clearance) for crankshaft for derbi moto and scooter with minarelli - yamaha engine 50 cc
BEARINGS

Code 6615137e

STRENGTHENED for ROAD and RACING USE

Wishlist

fkm / ptfe oil seal set for overhaul for minarelli - yamaha scooter and quad 2t 50 cc
OIL SEALS - DUST SEALS

Code 6619160

Wishlist

fkm/ptfe oil-seal set for crankshaft for minarelli - yamaha scooter and quad 2t 50 cc
OIL SEALS - DUST SEALS

Code 6618167

Wishlist

oil seal ø 17x28x5 mm fkm
OIL SEALS - DUST SEALS

Code 6617436b

-12%
Wishlist

oil-seal ø 25x40x7 for spring drives
OIL SEALS - DUST SEALS

Code 66 9070b

(spare part for Malossi secondary gears 67 8998 : out of production)

Wishlist

rapid sense system rpm temp hour meter
DEVICES

Code 5817540b

BATTERIES

Wishlist

battery charger smart battery charge & mantainer 6v/12v 1a for batteries from 2 to 20ah
BATTERIES

Code 4419240

Wishlist

malossi battery mb4l-b gel
BATTERIES

Code 4418916

SPARK-PLUGS

Wishlist

spark plug denso iridium iw f 27 (thread m14 - 12.7 mm)
SPARK PLUGS

Code 6314454.l0

INTAKE MANIFOLD KITS

Wishlist

nbr tilted intake manifold ø 20,5-23 l.19 for yamaha - mbk - minarelli vertical engines 2t 50 cc
INTAKE MANIFOLDS

Code 02 8400b

Original spare Ø 20: for original air box filter

Wishlist

nbr tilted intake manifold ø 21-27 length 19 for yamaha - mbk - minarelli horizontal 2t 50 cc engines
INTAKE MANIFOLDS

Code 02 8479b

Not suitable for original air box filter

OIL

Wishlist

7.1 racing gear oil full synt (sae 75w - 90) 0.25l
GEAR OIL

Code 7613471b

Wishlist

7.1 sport gear oil (sae 80w - 90) 0.25l
GEAR OIL

Code 7613469b

VALVES AND PETAL SETS

Wishlist

3 vl10 and original valve carbon fibre petals with thickness 0,30/0,35/0,40
REED VALVES - PETALS

Code 27 3549.c0

for ORIGINAL VALVE

Wishlist

automatic fuel compensator macsi
REED VALVES - PETALS

Code 27 8785

Wishlist

valve vl10 with carbon petals thickness 0.30
REED VALVES - PETALS

Code 27 7441.c0

Configuration filters