Home
ATALA CAROSELLO 50 2T

atala carosello 50 2t

Name: aluminium cylinder kit ø 47 pin ø 10 mhr replica
Brand: Malossi
SKU: 31 8437
Price: 238.00€ EUR
Availability: InStock

CYLINDER KIT

aluminium cylinder kit ø 47 pin ø 10 mhr replica

CYLINDER KITS - CYLINDERS

Code 31 8437

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7849

cast-iron cylinder kit ø 40 pin ø 10

CYLINDER KITS - CYLINDERS

Code 31 8562

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 8538

cast-iron cylinder kit ø 47 pin ø 10

CYLINDER KITS - CYLINDERS

Code 31 7083

IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7036

cast-iron cylinder ø 47 pin ø 10

CYLINDER KITS - CYLINDERS

Code 31 7002

CYLINDER ADAPTABLE ALSO to the ORIGINAL HEAD - IF the CRANKSHAFT has a Ø 12 PIN INSTALL the PISTON 34 7036

cylinder head ø 47 aluminium air

CYLINDER HEADS

Code 3819674

for Malossi CYLINDERS

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size 0

PISTONS

Code 34 8538

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size a

PISTONS

Code 34 8538.a0

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size b

PISTONS

Code 34 8538.b0

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size c

PISTONS

Code 34 8538.c0

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size d

PISTONS

Code 34 8538.d0

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size e

PISTONS

Code 34 8538.e0

to change CYL. KIT 31 8562 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0

PISTONS

Code 34 7036

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0

PISTONS

Code 34 7849

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size a

PISTONS

Code 34 7849.a0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b

PISTONS

Code 34 7036.b0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b

PISTONS

Code 34 7849.b0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c

PISTONS

Code 34 7036.c0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c

PISTONS

Code 34 7849.c0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d

PISTONS

Code 34 7036.d0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d

PISTONS

Code 34 7849.d0

To change CYL. KIT 31 7559 - 31 8501 from piston-pin Ø 10 TO 12 (* PLEASE CHECK the exact SELECTION of the installed piston)

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size e

PISTONS

Code 34 7036.e0

To change CYLINDER KIT 31 8284 from piston-pin Ø 10 TO 12 (* please check the exact SELECTION of the installed piston)

CRANKSHAFT - POWER CAMME

rhq sport - mhr crankshaft with pin ø12, 80 mm connection rod and stroke 39.2 mm

CRANKSHAFTS - CONNECTING RODS

Code 53 8009

ONLY for PISTON WITH PIN Ø 12

rhq sport crankshaft with pin ø 10 and stroke 39.2 mm

CRANKSHAFTS - CONNECTING RODS

Code 53 7891

CARBURETOR KIT

6 vl11 and original valve carbon fibre petals with thickness 0,30/0,35/0,40

REED VALVES - PETALS

Code 27 7054.c0

for ORIGINAL VALVE

automatic fuel compensator macsi

REED VALVES - PETALS

Code 27 8785

black pvc fuel tube with internal ø 5 and external ø 9 mm - length 1 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 22 1231

black pvc fuel tube with internal ø 7 and external ø 12 mm - length 1 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 22 1232

carburettor kit phbg 19 bs

CARBURETTOR (KITS)

Code 1611042

carburettor kit phbg 21 bs

CARBURETTOR (KITS)

Code 1610995

pvc fuel tube ø 5x9 mm - length 1 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216041b

pvc fuel tube ø 5x9 mm - length 10 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216718b

pvc fuel tube ø 6x9 mm - length 1 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216042b

pvc fuel tube ø 6x9 mm - length 10 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216730b

pvc fuel tube ø 7x10 mm - length 1 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216043b

pvc fuel tube ø 7x10 mm - length 10 m

GAS / STARTER CABLES - FUEL TUBES - BRAKE HOSE

Code 2216784b

spacer kit for yamaha - minarelli horizontal engine 50 cc

SETS

Code 2013224

valve vl12 with carbon petals thickness 0.30

REED VALVES - PETALS

Code 27 7731.c0

valve vl14 mhr with carbon petals thickness 0.30 mm

REED VALVES - PETALS

Code 2711817.c0

x360 fkm inclined intake manifold ø 22-28 lenght 33 (for yamaha - minarelli engines)

SETS

Code 2014525

Can be rotated of 360°

x360 fkm inclined intake manifold ø 30-35 lenght 52 (for yamaha - minarelli engines)

SETS

Code 2013847

Can be rotated of 360°

x360 racing fkm inclined intake manifold ø 22-24,5 lenght 33 (for yamaha - minarelli engines)

SETS

Code 2014524

Can be rotated of 360°

TRANSMISSION SET

3 black racing clutch springs ø 2,2 for delta and fly clutch

SPRINGS

Code 29 8745b

3 red reinforced clutch springs ø 2 for delta and fly clutch

SPRINGS

Code 29 8743b

3 yellow racing clutch springs ø 1,8 for delta and fly clutch

SPRINGS

Code 29 8742b

6 htroll rollers ø 15x12 gr.06,8

VARIATOR ROLLERS

Code 66 9417.i0

for ORIGINAL VARIATOR

adjustable automatic delta clutch for clutch bell ø 105

CLUTCHES

Code 52 7643

adjustable automatic delta clutch for clutch bell ø 107

CLUTCHES

Code 52 9451

homologated multivar variator for scooter

VARIATORS

Code 51 7075

** Homologation Code : NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

mhr spring set for fly clutch and delta clutches

SPRINGS

Code 29 8747

multivar mhr variator for yamaha - minarelli

VARIATORS

Code 5113161

non-adjustable automatic fly clutch for clutch bell ø 105

CLUTCHES

Code 52 8796

non-adjustable automatic fly clutch for clutch bell ø 107

CLUTCHES

Code 52 9450

racing spring set for clutch

SPRINGS

Code 29 9605

for vehicles WITH ORIGINAL CLUTCH BELL Ø 107

racing spring set for original clutch

SPRINGS

Code 29 7714

for vehicles WITH ORIGINAL CLUTCH BELL Ø 105

racing spring set for original clutch

SPRINGS

Code 29 7715

for vehicles WITH ORIGINAL CLUTCH BELL Ø 112

red variator adjuster spring (external ø 53.70x110 mm - ø wire 3.9 mm - k 4.7)

SPRINGS

Code 29 7046.r0

for Multivar and original variator - rigidity increase compared to original spring: +40%

sport spring set for fly clutch and delta clutches

SPRINGS

Code 29 8746

torque driver

TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 9223

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 34

torque driver external ø 115 mm

TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 8312

for vehicles WITH ORIGINAL MOBILE DRIVEN SPLIT PULLEY INTERNAL Ø 33

torsion controller variator spring guide for yamaha - minarelli engines 50 to 100 cc

FIXED COVERS - COVERS - TORSION CONTROLLER

Code 2512827

ventilvar half-pulley ø 97

TORQUE DRIVERS - TRANSMISSION SETS - HALF-PULLEYS

Code 61 7152

white variator adjuster spring (external ø 53.10x110 mm - ø wire 3.6 mm - k 3.5)

SPRINGS

Code 29 7047.w0

for Multivar and original variator - rigidity increase compared to original spring: +30%

x k belt for scooter (16,6x8x745 mm 28°)

TOOTHED BELTS

Code 6117010

x special belt for scooter (16x8x751 mm 28°)

TOOTHED BELTS

Code 6118140

yellow variator adjuster spring (external ø 53.50x115 mm - ø wire 3.7 mm - k 3.8)

SPRINGS

Code 29 7045.y0

for Multivar and original variator - rigidity increase compared to original spring: +35%

IGNITIONS - CONTROLLERS

spark plug cable kit and resistor spark plug cap

IGNITIONS - CONTROLLERS

Code 5519221

spark plug cable with ø 7 mm and length 50 cm

IGNITIONS - CONTROLLERS

Code 2219144b

tc unit electronic controller

IGNITIONS - CONTROLLERS

Code 55 8133

ONLY FOR vehicles WITH YAMAHA FLYWHELL - WITHOUT IMMOBILIZER KEY

tc unit rpm control k15 electronic controller complete with coil

IGNITIONS - CONTROLLERS

Code 55 8765

ONLY FOR vehicles WITH DUCATI FLYWHELL - WITHOUT IMMOBILIZER KEY

FILTERS

fuel filter ø 6

FUEL FILTERS - OIL FILTERS

Code 03 1380b

fuel filter ø 8

FUEL FILTERS - OIL FILTERS

Code 03 1381b

red filter e13 ø 42/50/60 inclined 25° for phbh - mikuni - keihin carburettors

AIR FILTERS

Code 0413527

BRAKE

brake pads homologated

BRAKES

Code 6215007bb

Front - for vehicles PRODUCED 1997 --> ** HOMOLOGATED **

mhr brake pads

BRAKES

Code 6215007br

Front - for vehicles PRODUCED 1997 -->

SHOCK-ABSORBER

rs1 rear shock absorber - wheelbase 280 mm and maximum ø spring 58 mm

SHOCK ABSORBERS - FORKS

Code 4615434

rs24 rear shock absorber - wheelbase 267 mm

SHOCK ABSORBERS - FORKS

Code 46 7588

20 mm longer wheelbase

ENGINE ACCESSORIES

2 roller bearings with balls ø 20x47x14 (c3h clearance) for crankshaft for derbi moto and minarelli - yamaha scooter 50 cc

BEARINGS

Code 6611566e

STRENGTHENED for ROAD and RACING USE

2 roller bearings with balls ø 20x47x14 (c4 clearance) for crankshaft for derbi moto and minarelli - yamaha scooter 50 cc

BEARINGS

Code 6616065e

STRENGTHENED for ROAD and RACING USE - Carbonitrided inner ring

2 roller bearings with balls ø 20x47x14 (c4h clearance) for crankshaft for derbi moto and scooter with minarelli - yamaha engine 50 cc

BEARINGS

Code 6615137e

STRENGTHENED for ROAD and RACING USE

fkm / ptfe oil seal set for overhaul for minarelli - yamaha scooter and quad 2t 50 cc

OIL SEALS - DUST SEALS

Code 6619160

fkm/ptfe oil-seal set for crankshaft for minarelli - yamaha scooter and quad 2t 50 cc

OIL SEALS - DUST SEALS

Code 6618167

oil seal ø 17x28x5 mm fkm

OIL SEALS - DUST SEALS

Code 6617436b

rapid sense system rpm temp hour meter

DEVICES

Code 5817540b

ACCESSORIES

BATTERIES

battery charger smart battery charge & mantainer 6v/12v 1a for batteries from 2 to 20ah

BATTERIES

Code 4419240

SPARK-PLUGS

spark plug denso iridium iw f 27 (thread m14 - 12.7 mm)

SPARK PLUGS

Code 6314454.l0

INTAKE MANIFOLD KITS

nbr tilted intake manifold ø 21-23 l.24 for yamaha - mbk - minarelli horizontal 2t engines

INTAKE MANIFOLDS

Code 02 8481b

nbr tilted intake manifold ø 22-28 length 24,5 for yamaha - mbk - minarelli horizontal 2t engines

INTAKE MANIFOLDS

Code 02 8399b

racing fkm tilted intake manifold ø 22-24,5 length 29 for yamaha - mbk - minarelli horizontal 2t 50 cc engines

INTAKE MANIFOLDS

Code 0213661b

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

racing fkm tilted intake manifold ø 22-28 length 29 for yamaha - mbk - minarelli horizontal 2t 50 cc engines

INTAKE MANIFOLDS

Code 0213662b

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

racing nbr tilted intake manifold ø 22-28 length 29 for yamaha - mbk - minarelli horizontal 2t 50 cc engines

INTAKE MANIFOLDS

Code 02 8857b

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

spacer kit for yamaha - minarelli horizontal engine 50 cc

SETS

Code 2013224

x360 fkm inclined intake manifold ø 22-28 lenght 33 (for yamaha - minarelli engines)

SETS

Code 2014525

Can be rotated of 360°

x360 fkm inclined intake manifold ø 30-35 lenght 52 (for yamaha - minarelli engines)

SETS

Code 2013847

Can be rotated of 360°

x360 racing fkm inclined intake manifold ø 22-24,5 lenght 33 (for yamaha - minarelli engines)

SETS

Code 2014524

Can be rotated of 360°

DELL'ORTO AND ACCESSORIES

1389 phva 17 5 ts carburettor

DELLORTO : CARBURETTORS - FILTERS - PUMPS

Code a01389

OIL

7.1 racing gear oil full synt (sae 75w - 90) 0.25l

GEAR OIL

Code 7613471b

7.1 sport gear oil (sae 80w - 90) 0.25l

GEAR OIL

Code 7613469b

VALVES AND PETAL SETS

6 vl11 and original valve carbon fibre petals with thickness 0,30/0,35/0,40

REED VALVES - PETALS

Code 27 7054.c0

for ORIGINAL VALVE

Configuration filters

Braking

Power

Service

Stability

Transmission

Subscribe to

Cylinder Kits

Exhaust Systems

Variators

aluminium cylinder kit ø 47 pin ø 10 mhr replica

cast-iron cylinder kit ø 40 pin ø 10

cast-iron cylinder kit ø 47 pin ø 10

cast-iron cylinder ø 47 pin ø 10

cylinder head ø 47 aluminium air

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size 0

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size a

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size b

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size c

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size d

piston 2t ø 40 with pin ø 12 and 2 rectangular rings size e

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size 0

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size a

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size b

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size c

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size d

piston 2t ø 47 with pin ø 12 and 2 rectangular rings size e

rhq sport - mhr crankshaft with pin ø12, 80 mm connection rod and stroke 39.2 mm

rhq sport crankshaft with pin ø 10 and stroke 39.2 mm

6 vl11 and original valve carbon fibre petals with thickness 0,30/0,35/0,40

automatic fuel compensator macsi

black pvc fuel tube with internal ø 5 and external ø 9 mm - length 1 m

black pvc fuel tube with internal ø 7 and external ø 12 mm - length 1 m

carburettor kit phbg 19 bs

carburettor kit phbg 21 bs

pvc fuel tube ø 5x9 mm - length 1 m

pvc fuel tube ø 5x9 mm - length 10 m

pvc fuel tube ø 6x9 mm - length 1 m

pvc fuel tube ø 6x9 mm - length 10 m

pvc fuel tube ø 7x10 mm - length 1 m

pvc fuel tube ø 7x10 mm - length 10 m

spacer kit for yamaha - minarelli horizontal engine 50 cc

valve vl12 with carbon petals thickness 0.30

valve vl14 mhr with carbon petals thickness 0.30 mm

x360 fkm inclined intake manifold ø 22-28 lenght 33 (for yamaha - minarelli engines)

x360 fkm inclined intake manifold ø 30-35 lenght 52 (for yamaha - minarelli engines)

x360 racing fkm inclined intake manifold ø 22-24,5 lenght 33 (for yamaha - minarelli engines)

3 black racing clutch springs ø 2,2 for delta and fly clutch

3 red reinforced clutch springs ø 2 for delta and fly clutch

3 yellow racing clutch springs ø 1,8 for delta and fly clutch

6 htroll rollers ø 15x12 gr.06,8

adjustable automatic delta clutch for clutch bell ø 105

adjustable automatic delta clutch for clutch bell ø 107

homologated multivar variator for scooter

mhr spring set for fly clutch and delta clutches

multivar mhr variator for yamaha - minarelli

non-adjustable automatic fly clutch for clutch bell ø 105

non-adjustable automatic fly clutch for clutch bell ø 107

racing spring set for clutch

racing spring set for original clutch

racing spring set for original clutch

red variator adjuster spring (external ø 53.70x110 mm - ø wire 3.9 mm - k 4.7)

sport spring set for fly clutch and delta clutches

torque driver

torque driver external ø 115 mm

torsion controller variator spring guide for yamaha - minarelli engines 50 to 100 cc

ventilvar half-pulley ø 97

white variator adjuster spring (external ø 53.10x110 mm - ø wire 3.6 mm - k 3.5)

x k belt for scooter (16,6x8x745 mm 28°)

x special belt for scooter (16x8x751 mm 28°)

yellow variator adjuster spring (external ø 53.50x115 mm - ø wire 3.7 mm - k 3.8)

spark plug cable kit and resistor spark plug cap

spark plug cable with ø 7 mm and length 50 cm

tc unit electronic controller

tc unit rpm control k15 electronic controller complete with coil

fuel filter ø 6

fuel filter ø 8

red filter e13 ø 42/50/60 inclined 25° for phbh - mikuni - keihin carburettors

brake pads homologated

mhr brake pads

rs1 rear shock absorber - wheelbase 280 mm and maximum ø spring 58 mm

rs24 rear shock absorber - wheelbase 267 mm