Price
aluminium cylinder kit ø 57,5 pin ø 15 mhr vespa et3 prim./ets/pk 125
Code: 3115829Model: vespa ets 125 2t
Description
Vespa ET3 125 Cylinder
THE NEW LEGEND
Malossi is proud to introduce to its public the total renewal of a real legend, one of the most long-lived and successful projects ever linked to our trade mark: the new and amazing cylinder for Vespa ET3 125. This time wholly aluminium made.
The story of this cylinder kit starts in 1982 when, for the first time in a cast iron cylinder with this ring, an oring is used as seal gasket between head and cylinder: a refined solution representing so far the state of the art.
Malossi has taken a blank paper to redesign its project, drawing it up new from the roots, thus renewing and releasing a cylinder which rightfully joins the famous range of MHR cylinder kits.
Aluminium replaced cast iron and the reed valve seat has been totally redesigned, a real revolution able to fill the gaps of the original Vespa intake already since 1982 and now equipped with a centre support in order to grant a higher stability to the piston ring.
Displacement increases to 130cc, whereas the six ports are the result of the know-how and technology gained during decades of scooter races. Now, for the first time in the history, they are fitted on a Vespa cylinder which can reach very high horse powers and revolutions up to 11.000 rpm.
The exhaust system as well has been completely renewed and it is equipped with a booster now, a racing solution which grants a wide expulsion surface of the burnt gases, thus reducing the piston ring wear.
Malossi philosophy has always been to supply a "plug and play", complete and powerful kit. Therefore, the total new edition of the reed-valve block specific for this cylinder kit couldn't miss (code = 2016319 - only for VESPA ET3 PRIMAVERA).
Thanks to a considerable number of studies and fluid dynamics simulations created using futuristic softwares, manifolds have been perfectly machined so as to obtain an almost straight system, able to ensure the optimal passage from carburettor to intake, while perfectly remaining inside the Vespa body.
The piston is brand new as well, specifically designed for this cylinder, now super light, with one piston ring and very high performances.
TECHNICAL FEATURES
ALUMINIUM CYLINDER
- Cylinders obtained by gravity die-casting in permanent steel moulds.
- Material: hardened and tempered high silicon content primary aluminium alloy.
- Machining: on numerically controlled high precision machine tools.
- Cylinder liner with silicon carbide metal-spray coating on a galvanic nickel matrix, cross-honed with passes with diamonds for very tight tolerances.
- Recalculated and increased heat exchange surfaces.
- Exhaust and transfer ports designed and tested for maximum thermodynamic performance.
- Dimensional and surface finish quality control performed according to Malossi's internal specifications.
- Cylinder and piston selected for a fit of 0.005 mm.
|
MHR |
57,5 mm |
|
Use |
Sport / Racing |
|
Power range |
18 / 25 cv |
|
Level of elaboration |
Easy |
|
Carburettor recommended |
Phbl 25 / Vhst 28 |
|
Stroke |
51 |
|
Compression ratio |
1:12,5 |
|
N° piston rings |
1 |
|
N° ports |
7 |
|
Head |
Hemispheric |
|
Spark plug |
Central IW 27 |
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Compatible brands and models
| Brand | Model |
|---|---|
| PIAGGIO | PIAGGIO APE 50 2T <-1989 In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. - To be used with CRANKSHAFTS stroke 51 mm art. 5316517 - 5316528 - 5316594 and AIR CUF Vespa 125 cc. |
| PIAGGIO | PIAGGIO APE FL2 50 2T 1990->1995 In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. - To be used with CRANKSHAFTS stroke 51 mm art. 5316517 - 5316528 - 5316594 and AIR CUF Vespa 125 cc. |
| PIAGGIO | PIAGGIO APE FL3 50 2T 1996->1999 In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. - To be used with CRANKSHAFTS stroke 51 mm art. 5316517 - 5316528 - 5316594 and AIR CUF Vespa 125 cc. |
| PIAGGIO | PIAGGIO APE FL 50 2T 1989->1990 In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. - To be used with CRANKSHAFTS stroke 51 mm art. 5316517 - 5316528 - 5316594 and AIR CUF Vespa 125 cc. |
| VESPA | VESPA ETS 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
| VESPA | VESPA ET3 Primavera 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
| VESPA | VESPA PK XL 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
| VESPA | VESPA PK 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
| VESPA | VESPA PK FL 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
| VESPA | VESPA Primavera 125 2T In order to fit the cylinder kit it is necessary to modify the crankcase and to fit also Malossi ignition VESpower or similar. |
Components and Spare Parts
Download