aprilia sr r 50 2t lc euro 4 2018-> (piaggio ca81m)

Spare part for Malossi CYLINDER KITS 3113042 - 3113042.T0 : out of production

For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 53 9212 - 5316005 - (5314887 out of production). For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

IT IS ADVISED TO USE crankshaft 53 7600 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

Crankcase MODIFICATIONS: BORING AND CHAMFERING - To be combined EXCLUSIVELY with crankshafts 5317822 (5316029 out of production)

For CRANKSHAFTS 53 9212 - 5316005 (53 9703 - 5314544 - 5314887) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

To be assembled EXCLUSIVELY with Malossi MHR C-one ENGINE CRANKCASE 5715844 - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

To be assembled EXCLUSIVELY with: ENGINE CRANKCASE 5715845 and CRANKSHAFT (stroke 44 mm) 5317822 (5316029 : out of production) - For the proper installation of the cylinder kit it is necessary to fit the temperature sensor ADAPTER, art. 1518132B

Spare part for Malossi CRANKSHAFT 5313270 : out of production

TO COUPLE ONLY WITH cylinder Kits 3115142 3115349 - 3115901

Crankcase MODIFICATIONS: BORING - TO BE COUPLED ONLY WITH cylinder kits 3115385 - 3115883 (3113042/.T0 : out of production) AFTER FITTING SPACER 0716345

To be assembled EXCLUSIVELY with CYLINDER KIT 3118679

TO COUPLE ONLY WITH cylinder Kits 31 8884 - 3112099.T0 - 3113030 - 3115142.T0 - 3115349 - (31 9128 - 3112099 - 3115142 : out of prod.)

** NOT HOMOLOGATED FOR THIS VEHICLE ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

TO COUPLE ONLY WITH cylinder Kits 3115385 - 3115883

TO COUPLE ONLY WITH cylinder Kits 3115349 - 3115901 (3115142 - 3115142.T0 : out of production)

** NOT HOMOLOGATED FOR THIS VEHICLE ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

for ORIGINAL VALVE

Spare part for Malossi exhausts sys. 3212437 - 3215167 : out of production

ONLY for MHR C/RC-one CRANKCASE

ONLY for ORIGINAL CRANKCASE

Spare part for Malossi EXHAUST SYSTEM 3215134 : out of production

for the ASSEMBLY MODIFY the CRANKCASE

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360° - for PHBG 15-21 Racing (linkage 28)

for ORIGINAL VARIATOR

for Multivar and original variator - rigidity increase compared to original spring: +114%

for Multivar and original variator - rigidity increase compared to original spring: +106%

ONLY for OVER RANGE MHR ALUMINUM

for Multivar and original variator - rigidity increase compared to original spring: +60%

Hub for original variator without limiter

ALSO for OVER RANGE

for Multivar and original variator - rigidity increase compared to original spring: +82%

ONLY for OVER RANGE

ONLY for OVER RANGE MHR ALUMINUM

ELECTRIC STARTER IS CUT OUT

for Multivar and original variator - rigidity increase compared to original spring: +30%

ONLY for ORIGINAL CRANKCASE

Front ** NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

Front

Front ** NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

Rear ** NOT HOMOLOGATED ** THE ABSENCE OF HOMOLOGATION DOES NOT LIMIT THE PRODUCT FITTING

Front

Rigidy compared +30% to the Malossi shock abs. RS24/10

ONLY for vehicles WITH Malossi MHR C-one/RC-one ENGINE CRANKCASE

To be assembled EXCLUSIVELY with: CRANKSHAFT (stroke 47 mm) 5318730 and CYLINDER KIT 3118679

To be assembled EXCLUSIVELY with: CRANKSHAFTS (stroke 44 mm) 5317822 (5316029 : out of production) AND CYLINDER KIT 3115883

To be assembled EXCLUSIVELY with Malossi CARBURETOR KITS: 1611021.T PHBG 19 BS OR with 1613890.T0 PHBG 21 BS OR with 1616276 VHST 28 BS

NOT to be used on VEHICLE WITH ORIGINAL PRIMARY GEARS

Carbonitrided inner ring , oversize balls and special reduced outer ring.

STRENGTHENED for ROAD and RACING USE

TO BE USE WITH MODULAR-HEAD cylinder kits

Spare part for Malossi exhausts sys. 3212437 - 3215167 : out of production

Spare part for Malossi EXHAUST SYSTEM 3215134 : out of production

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Original spare Ø 20 : for original air box filter

For original air box filter

Not suitable for original air box filter

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360°

Can be rotated of 360° - for PHBG 15-21 Racing (linkage 28)

for ORIGINAL VALVE

for the ASSEMBLY MODIFY the CRANKCASE