Price

65.10€ -10% 58.59€
Available Sold and shipped by: RESILIENZA LUXEMBOURG SÀRL-S
Add to cart

fkm tilted intake manifold ø 21-24,5 length 26,5 for piaggio - gilera 2t 50 cc engines

Code: 02 9732b

Model: piaggio typhoon 50 2t euro 4 2018-> (ca41m)

Read more

Description

INTAKE MANIFOLDS


Intake manifold conveys the air-fuel mixture to the engine by means of reed valve.


The total efficiency of an engine is calculated as the product of various partial efficiencies, such as:
- volumetric efficiency
- thermodynamic efficiency
- mechanical efficiency

Volumetric efficiency is the ratio between the quantity of fuel that can enter the combustion chamber and the displacement of the engine.


One of the main factors affecting volumetric efficiency is loss due to friction that the fluid encounters (air-fuel mix) when feeding from the air filter to the combustion chamber. Therefore, one of the components that greatly influences this loss is the intake manifold, since all of the mix has to travel through it with the minimum possible loss. For this reason, sudden increases in section and corners along the mix path must absolutely be avoided.
The intake manifold also acts as an accumulation tank for the fresh load, since the mix, travelling at a certain speed, requires time to stop when the reed valve closes. Therefore, mix collects in the manifold and exerts pressure against the reeds. For this reason, each manifold has a well-defined range of revolutions within which it provided maximum efficiency (tuned manifold).
In addition, the manifold supports the carburettor by connecting it to the engine casing or to the cylinder, damping vibrations between casing and carburettor and preventing emulsion of gas and air in the carburettor tank.
This apparently simple component therefore requires a great deal of study in order to take full advantage of all of its qualities.
Malossi engineers have achieved this to perfection. Malossi, with decades of experience in engine fuelling systems, has created a new line of manifolds in rubber and aluminium alloy for the new generation of scooters, and has tested and developed the line on roads and race tracks.
Malossi rubber manifolds feature a composite structure. Their construction begins with an aluminium insert that is encased in a special plastic material that is impervious to oils and fuels, guaranteeing increased rigidity at the point of attachment to the casing and greater flexibility of the manifold body.

 

ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic.

 

Piaggio - Gilera 2T 50 engines

APRILIA - DERBI - GILERA - ITALJET - PIAGGIO

Material

INTER-AXIS mm

Ø hole

Ø manifolds

Ø inlet

total length

carburettors applications

Note

02 8732B NBR 52 6,5 21 24,5 26,5

PHBG 15-21

Not suitable for original air box filter
02 8856B NBR 52 6,5 22 28 26,5

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter
02 9441B viton 52 6,5 22 28 26,5

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter
02 9732B viton 52 6,5 21 24,5 26,5

PHBG 15-21

Not suitable for original air box filter

 

 

Yamaha - MBK - Minarelli horizontal 2T 50 engines

APRILIA - BENELLI - BETA - CPI - EXPLORER

HUPPER -ITALJET - MALAGUTI - MBK - YAMAHA

Material

Ø hole

Ø manifolds

Ø inlet

total length

carburettors applications

Note

02 8857B NBR 6,7 22 28 29

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter
0213222B

NBR

6,7 22 24,5 29

PHBG 15-21 Racing

Not suitable for original air box filter
0213661B viton 6,7 22 24,5 29

PHBG 15-21 Racing

Not suitable for original air box filter
0213662B viton 6,7 22 28 29

PHBG 15-21 Racing (linkage 28)

PHVB 22 PHBL 22-25

Not suitable for original air box filter

 

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use

Compatible brands and models

Brand Model
APRILIA APRILIA MOJITO CUSTOM 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SCARABEO CLASSIC 50 2T euro 4 2018-> (CA91M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SCARABEO STREET 50 2T (PIAGGIO) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SCARABEO STREET 50 2T euro 4 2018-> (CA91M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SPORTCITY ONE STREET 50 2T euro 2 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR (carb.) 50 2T LC 2004-> (PIAGGIO) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR R 50 2T LC euro 4 2018-> (PIAGGIO CA81M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR MOTARD 50 2T euro 2 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR MOTARD 50 2T euro 4 2018-> (CA41M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR R (carb.) 50 2T LC (PIAGGIO) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
APRILIA APRILIA SR Street 50 2T LC euro 2 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI DERBI ATLANTIS - BULLET 50 2T 2003-> Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI DERBI GP1 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI DERBI GP1 OPEN 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI DERBI GP1 REVOLUTION 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
DERBI DERBI VARIANT Sport 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA DNA 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA EASY MOVING 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA ICE 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA RUNNER SP 50 2T LC <-2005 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA RUNNER SP 50 2T LC 2006-> (C451M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA RUNNER 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA STORM 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA STALKER 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA TYPHOON 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
GILERA GILERA TYPHOON X 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
ITALJET ITALJET JET SET 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
ITALJET ITALJET TORPEDO NEW 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG Power 50 2T LC euro 4 2018->2020 (CA71M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO DIESIS 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG EXTREME 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG EXTREME 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO FLY 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO FREE 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO LIBERTY 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG MC2 50 2T LC <-1997 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG MC2 50 2T LC 1998-> Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG MC3 DT 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG MC3 DD 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NTT 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG Power DD 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO NRG Power DT 50 2T (C453M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO QUARTZ 50 2T LC Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO SFERA RESTYLING 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO SFERA 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO TYPHOON 50 2T 2007->2010 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO TYPHOON 50 2T euro 2 2011->2017 (C421M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO TYPHOON 50 2T euro 4 2018-> (CA41M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO ZIP Fast Rider 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO ZIP 50 2T 2000-> (C25EM) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO ZIP 50 2T <-1999 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO ZIP SP 50 2T LC 2001-> Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
PIAGGIO PIAGGIO ZIP SP 50 2T LC <-2000 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA ET2 50 2T 2000-> Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA ET2 50 2T <-1999 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA LX 50 2T Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA Primavera 50 2T euro 2 (C533M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA S 50 2T euro 2 (C381M) Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic
VESPA VESPA Sprint 50 2T euro 2 Not suitable for original air box filter - ATTENTION: in order to use the MHR manifolds it is necessary to perform some small modifications to the adjacent plastic

Download

fkm tilted intake manifold ø 21-24,5 length 26,5 for piaggio - gilera 2t 50 cc engines

58.59€
Add to cart