Price
multivar mhr team 2 aluminum variator for piaggio 2000 scooter
Code: 5118238Model: piaggio nrg power 50 2t lc euro 4 2018->2020 (ca71m)
Description
MULTIVAR MHR TEAM 2
No wonder then if with the MULTIVAR MHR TEAM 2 variator, your scooter suddenly will have an extra sprint, a consistency in shifting, a greater mechanical "ease" at high speeds and a constancy in performance you've never experienced before with the original version!
TECHNICAL NOTES:
The bushing is the point of contact between the half-pulley and the variator hub and must slide radially and axially without being deformed.
With this in mind, we have improved the entire system by using hardened steel bushings and ground, both on the internal and external diameter, and, thanks to the use of 2 oil seals, the lubricating grease present, in a reservoir, laps the walls of the coupling hub bushing ensuring minimum friction in any condition, in addition to maximum efficiency.
The 22 mm variator hub has also been improved in design: in fact, holes have been made to connect the internal and external chambers for grease flow and increase lubrication. This technology also allows to reduce the tolerances and, consequently, also all the coupling plays are improved and optimized.
The kit contains a 99.5 mm diameter mobile half pulley made of a special cast aluminium alloy.
The contact surface between pulley and belt is super-finished with a diamond tool to grant a constant coefficient of friction, calculated to prevent both belt slip and premature wear.
To satisfy the innumerable adjustings required by racing scooters, depending on the track type and on the tuning of the engines, the Multivar MHR is supplied with 2 sets of 6 rollers and a counter-spring in pre-hardened silicon-chrome steel alloy with counter clockwise winding (racing). In addition, other springs of the same class with different loads are available as options.
Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use
Compatible brands and models
Components and Spare Parts
Product name | Code | Price | ||
---|---|---|---|---|
multivar variator adaptor ø 14,8x25x6 mm | 08 9748b | 6.21€ | Cart | |
hub (ø 22x14.8x49 mm) for multivar 2000 mhr team variator | 2318240b | 37.22€ | Cart | |
fixed cover for multivar 2000 variator | 25 9021b | 31.36€ | Cart | |
moplen circlip ø 8x22x15 | 2618644b | 8.61€ | Cart | |
purple variator adjuster spring (external ø 57.80x91 mm - ø wire 4.0 mm - k 5.5) | 29 8324.v0 | 11.88€ | Cart | |
3 sliders for multivar 2000 variator | 3711163 | 5.71€ | Cart | |
ventilvar 2000 half-pulley with external ø 100,5 mm - angle 14° | 6115790b | 45.17€ | Cart | |
movable half-pulley for mhr team 2 variator | 6118237b | 73.80€ | Cart | |
6 htroll rollers ø 19x15,5 gr.04,3 | 66 9420.a0 | 15.55€ | Cart | |
6 htroll rollers ø 19x15,5 gr.03,8 | 66 9420.z0 | 15.55€ | Cart | |
2 nbr oil-seals ø 22x28x4 mm | 6618241e | 8.00€ | Cart | |
tube of lubricating grease 7.1 mhr grease gr.40 | 7615375b | 9.69€ | Cart |
Applies to
Product name | Code | Price | |
---|---|---|---|
over range mhr aluminum - piaggio 2000 (short crankcase) | 6115780 | 545.17€ | Cart |
over range mhr aluminum - piaggio 2000 (long crankcase) | 6115781 | 529.28€ | Cart |
over range piaggio complete transmission unit (long crankcase) | 6118835 | 380.52€ | Cart |
over range piaggio 2000 complete transmission unit (short crankcase) | 6118836 | 380.52€ | Cart |
over range complete transmission unit for piaggio engines | 6119040 | 391.94€ | Cart |
Download
Faq
-
Can this variator and the whole Malossi transmission be fitted?
This variator should only be fitted in conjunction with all other over-range items. The mounting of the over range in turn depends on the type of vehicle configuration.