digitronic mhr team digital electronic controller with trimmer

Description

The inner rotor ignition systems designed by Malossi are based on the state-of-the-art technology applied to racing. Such a new system resulted from the need to overcome the technical limitations imposed by conventional flywheel ignition, which cannot ensure consistent performance over 10,000 rpm and causes severe setting-up problems for racing vehicles.

We made the control unit even more immune to interferences developing an uP STM8 - 8 bit microprocessor with processing speed of 20MIPS, guaranteeing spark timing with greater accuracy than prior versions!

The MHR version includes a control unit with variable spark advance timing, not adjustable.

Technical features

CDI

• Variable spark advance.
• System based on an uP STM8 - 8 bit microprocessor with a processing speed of 20MIPS (Million Instructions Per Second).
• Reduced processing time, improved spark advance precision and stability.
• Hardware architecture with improved immunity to interferences.
• Temperature class 105°C cable.
• Vector spark advance tables comprised of 24 breakpoints with linear interpolation.

High voltage coil

• Capacitive discharge.
• Ultra high efficiency.
• Constant 30,000 V discharge voltage up to 20,000 rpm.

Rotor-stator unit

• Small (Ø 58 mm) and light inner rotor.
• Permanent magnet rotor ensuring excellent performance.
• Unprecedented efficiency with minimum weight.

WARNING : with this kind of ignition the lighting set is disconnected.

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use