kit fly clutch

Description

KIT FLY CLUTCH

Complete rear transmission for Piaggio mopeds with variator

The FLY CLUTCH Kit is interchangeable with the original transmission and improves performance and durability owing to the use of high-quality materials and reinforcing it where required.

1. Fixed Pulley
2. Torque Driver
3. Yellow variator contrast spring
4. Fly Clutch
5. Assembled fixed hub

For vehicles with variators.

1 . Fixed Pulley

The 102mm-diameter, fixed, 15mm pulley is nitride hardened to produce excellent levels of durability, has a positive double “D” mount on the hub and is secured with an M24 galvanized nut.

2 . Torque Driver

This consists of a 15° pulley with a diameter of 102 mm, which is TIG welded to a specially designed hub with a mould-pressed EKU bushing. EKU is a dry self-lubricating material that ensures excellent sliding properties and minimal wear.
Adaptable even to the original Piaggio system.

3 . Variator Contrast Spring

The springs, made of high-carbon silicon-alloy steel and are heat-treated, are dynamically balanced, stove-enamelled and designed for each specific application.

4 . Fly Clutch

Fly Clutch consists of three new clutch shoes that use the Fly Malossi system. Designed with a specific shoe, it is coupled with Malossi springs to operate at a pre-established optimum RPM hook-in point. Once mounted on the hub assembly, the shoes are secured in position using a reinforced ring, which makes the entire assembly rigid.

5 . Assembled Fixed Hub

This is the main structural component of the clutch.
Its multifunctional elements include: a clutch shoe plate, a chrome hub in which the moving pulley operates and a clutch bell that allows the kick-starter pedal to engage and lock.
The assembly is TIG welded to the tightest tolerances to ensure perfect alignment. The pivot pins for the shoes have been increased in diameter by 6.5 mm and specially designed to be riveted and maintain alignment.
A primary gear shaft rotates within the unit that is held using two 13x19x12 needle bearings, providing increased rigidity.
Two oil seals ensure a sealed environment for Malossi lubrication.

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use

Faq

• Mounting this kit on a Piaggio Ciao what bell is needed?

  It can be combined with the original bell, if it is not worn. Or it can be fitted with our 7718152B .