Price

530.45€ -10% 477.40€
Low availability Sold and shipped by: RESILIENZA LUXEMBOURG SÀRL-S
Add to cart

aluminium complete cylinder ø 63 pin ø 15 h2o i-tech 4-stroke

Code: 3115707

Model: yamaha smax 160 ie 4t lc

Read more

Description

Complete cylinder with CDI

FORCE MASTER 2

I-TECH 4-stroke

These absolutely reliable high performance oversized cylinders are designed and manufactured with CadCam system at Malossi premises in Calderara di Reno (Bologna), using known and proven calculations and technologies to redefine the new thermo-fluid dynamic cycle and the cooling system, as well as structural calculations.

These cylinders resulted to be exceptional for their amazing acceleration performance.

During the development process original cdis alone proved not to be sufficient to provide an adequate fuel supply to the engine. So Malossi decided to develop FORCE MASTER 2: an additional cdi with special maps capable to optimize carburetion.

With the usual carefulness and the use of sophisticated methods and instruments, Malossi engineers have managed to adjust carburetion point by point, from minimum to maximum and vice versa, avoiding any engine hesitation.

Cylinder

  • Bore: Ø 63 mm
  • Stroke: 58.7 mm
  • Displacement: 183
  • Compression ratio: 10.6:1
  • Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
  • Machining: on machine tools with high precision numerical control.
  • Cylinder-piston connection with an allowance of 0.05 mm.
  • Recalculated and upgraded heat exchange surfaces.

Piston

  • Ultra compact with 3 rings.
  • Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
  • Machining on machine tools with numerical control.
  • Lightened and reinforced.
  • Upgraded heat exchange surfaces.

Piston rings

  • Special rings with high sliding ease and very high mechanical resistance.
  • I° ring compression in nitrided and chromium steel.
  • II° special cast iron ring Three - piece scraper ring made of chromium-plated special steel alloy.

CDI FORCE MASTER 2

  • Carburation adjusting
  • ± 20% at min/medium/max
  • RPM limiter: + 1000 RPM
  • 4 different maps:
    • curve 0: original cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 1: Malossi cylinder, original camshaft, original exhaust system
    • curve 2: Malossi cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 3: Malossi cylinder, Malossi camshaft, Malossi exhaust system with DB killer

Products reserved exclusively for racing in specifically designed locations according to the provisions of the competent sporting authorities. We disclaim all liability for improper use

Compatible brands and models

Brand Model
YAMAHA YAMAHA SMax 160 ie 4T LC
YAMAHA YAMAHA Xenter 150 ie 4T LC euro 3 <-2018 (G397E)
YAMAHA YAMAHA Xenter 150 ie 4T LC euro 4 2018->

Components and Spare Parts

Product name Code Price
complete cylinder gasket set ø 63 for original cylinder head complete cylinder gasket set ø 63 for original cylinder head 1114948b 28.02€ Cart
wiring kit wiring kit 2218606 29.02€ Cart
pin ø 15x08x51 for piston pin ø 15x08x51 for piston 2312424 13.50€ Cart
4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size 0 4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size 0 3415809 110.00€ Cart
4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size a 4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size a 3415809.a0 110.00€ Cart
4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size b 4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size b 3415809.b0 110.00€ Cart
4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size c 4t ø 63 piston size 0 with pin ø 15 and 3 rectangular rings size c 3415809.c0 110.00€ Cart
piston ring set 4t ø 63 piston ring set 4t ø 63 3518852 21.00€ Cart
binding clap ø 9x7x15 binding clap ø 9x7x15 3715886 6.52€ Cart
force master 2 electronic controller for i-tech 4 stroke cylinders force master 2 electronic controller for i-tech 4 stroke cylinders 5515708 255.84€ Cart

Download

aluminium complete cylinder ø 63 pin ø 15 h2o i-tech 4-stroke

477.40€
Add to cart