Preis

647,15€ -10% 582,43€
knappe Verfügbarkeit Verkauft und versandt von: Malossi Spa
In den Einkaufswagen legen

kompletter zylinder i - tech 4 - stroke ø 63 aus aluminium mit kolbenbolzen ø 15 h2o

Code: 3115707

Mehr erfahren

Beschreibung

Complete cylinder with CDI

FORCE MASTER 2

I-TECH 4-stroke

These absolutely reliable high performance oversized cylinders are designed and manufactured with CadCam system at Malossi premises in Calderara di Reno (Bologna), using known and proven calculations and technologies to redefine the new thermo-fluid dynamic cycle and the cooling system, as well as structural calculations.

These cylinders resulted to be exceptional for their amazing acceleration performance.

During the development process original cdis alone proved not to be sufficient to provide an adequate fuel supply to the engine. So Malossi decided to develop FORCE MASTER 2: an additional cdi with special maps capable to optimize carburetion.

With the usual carefulness and the use of sophisticated methods and instruments, Malossi engineers have managed to adjust carburetion point by point, from minimum to maximum and vice versa, avoiding any engine hesitation.

Cylinder

  • Bore: Ø 63 mm
  • Stroke: 58.7 mm
  • Displacement: 183
  • Compression ratio: 10.6:1
  • Material: primary aluminium alloy with a high content of hardened and tempered silicon, cylinder liner with silicon carbide coating in a galvanic nickel die and crossed smoothing with two diamond passages with very limited tolerances.
  • Machining: on machine tools with high precision numerical control.
  • Cylinder-piston connection with an allowance of 0.05 mm.
  • Recalculated and upgraded heat exchange surfaces.

Piston

  • Ultra compact with 3 rings.
  • Material: special aluminium alloy with high silicon content, low thermal expansion and a tin facing on the sliding surfaces.
  • Machining on machine tools with numerical control.
  • Lightened and reinforced.
  • Upgraded heat exchange surfaces.

Piston rings

  • Special rings with high sliding ease and very high mechanical resistance.
  • I° ring compression in nitrided and chromium steel.
  • II° special cast iron ring Three - piece scraper ring made of chromium-plated special steel alloy.

CDI FORCE MASTER 2

  • Carburation adjusting
  • ± 20% at min/medium/max
  • RPM limiter: + 1000 RPM
  • 4 different maps:
    • curve 0: original cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 1: Malossi cylinder, original camshaft, original exhaust system
    • curve 2: Malossi cylinder, original camshaft, Malossi exhaust system with DB killer
    • curve 3: Malossi cylinder, Malossi camshaft, Malossi exhaust system with DB killer

Produkte, die ausschließlich für Wettkämpfe an den dafür vorgesehenen Orten gemäß den Bestimmungen der zuständigen Sportbehörden bestimmt sind. Wir übernehmen keine Haftung für unsachgemäße Verwendung.

Kompatible Marken und Modelle

Marke Modell
YAMAHA YAMAHA SMax 160 ie 4T LC
YAMAHA YAMAHA Xenter 150 ie 4T LC euro 3 <-2018 (G397E)
YAMAHA YAMAHA Xenter 150 ie 4T LC euro 4 2018->

Komponenten und Ersatzteile

Produktbezeichnung Code Preis
kompletter dichtungssatz für zylinder ø 63 für original-zylinderkopf kompletter dichtungssatz für zylinder ø 63 für original-zylinderkopf 1114948b 34,18€ Einkaufswagen
verkabelung kit verkabelung kit 2218606 35,40€ Einkaufswagen
kolbenbolzen ø 15x08x51 für kolben kolbenbolzen ø 15x08x51 für kolben 2312424 16,47€ Einkaufswagen
kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings 0 kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings 0 3415809 134,20€ Einkaufswagen
kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings a kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings a 3415809.a0 134,20€ Einkaufswagen
kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings b kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings b 3415809.b0 134,20€ Einkaufswagen
kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings c kolben ø 63 bolz.ø 15 -3 ringe rech./ölabstreifrings c 3415809.c0 134,20€ Einkaufswagen
kolbenringsatz ø 63 1 recht./2 ölabstreifrings kolbenringsatz ø 63 1 recht./2 ölabstreifrings 3518852 25,62€ Einkaufswagen
schellen ø 9x7x15 schellen ø 9x7x15 3715886 7,95€ Einkaufswagen
elektronische zündbox force master 2 für zylinder i - tech 4 stroke elektronische zündbox force master 2 für zylinder i - tech 4 stroke 5515708 312,12€ Einkaufswagen

Download

kompletter zylinder i - tech 4 - stroke ø 63 aus aluminium mit kolbenbolzen ø 15 h2o

582,43€
In den Einkaufswagen legen